<label id="hi3ik"><kbd id="hi3ik"></kbd></label>
    <center id="hi3ik"></center>
    <span id="hi3ik"><noframes id="hi3ik">
    歡迎來到中科聚峰機械有限公司!

    24小時服務熱線:

    400-879-1999

    點擊撥打服務熱線:400-879-1999
    當前位置:首頁>新聞中心>常見問題>自動上料攪拌車異常抖動怎么回事?

    自動上料攪拌車異常抖動怎么回事?

    來源:http://www.djkenshu.com/ 日期:2022-12-21 發布人:guanli
    概述:自動上料攪拌車在工作很長時間之后,可能會出現儀表臺、駕駛室抖動現象,且抖動現象越來越嚴重,以至駕駛室、整機也產生抖動。抖動現象造成
    自動上料攪拌車在工作很長時間之后,可能會出現儀表臺、駕駛室抖動現象,且抖動現象越來越嚴重,以至駕駛室、整機也產生抖動。抖動現象造成該機物料稱重不準確,無法正常使用。下面技術人員給大家分析一下引起抖動的原因有哪些?
    After the automatic feeding mixer works for a long time, the instrument panel and cab may shake, and the shaking phenomenon is getting more and more serious, so that the cab and the whole machine also shake. The shaking phenomenon causes the material weighing of the machine to be inaccurate and cannot be used normally. The following technicians will analyze the causes of jitter?
    1、自動上料攪拌車液壓系統采用轉向優先方式,轉向泵輸出的壓力油與工作泵輸出的壓力油合流后向工作裝置供油。工作泵只有在工作裝置動作時才承受負荷,而轉向泵不但在工作裝置動作時承受負荷,轉向時也承受負荷,因此轉向泵工作時間相對較長、磨損較大。
    1. The hydraulic system of the automatic feeding mixer adopts the steering priority mode. The pressure oil output from the steering pump and the pressure oil output from the working pump combine to supply oil to the working device. The working pump bears the load only when the working device acts, while the steering pump bears the load not only when the working device acts, but also when steering, so the steering pump has a relatively long working time and great wear.
    2、自動上料攪拌車在優先閥閥體、閥芯、調壓彈簧和壓力油的共同作用下,EF口開啟與閉合按照一定頻率相互變換,便發生一定頻率的振動。由于該振動與儀表臺、駕駛室的固有振動頻率接近,導致儀表臺、駕駛室發生共振。
    2. Under the joint action of the priority valve body, valve core, pressure regulating spring and pressure oil, the opening and closing of EF port of the automatic feeding mixer change with each other according to a certain frequency, and a certain frequency of vibration occurs. As the vibration frequency is close to the natural vibration frequency of the instrument panel and cab, the instrument panel and cab will resonate.
    自動上料攪拌車
    此外自動上料攪拌車負載感應變速控制系統能縮短作業循環,降低燃油消耗率達15%,提高作業效率和作業經濟性同時能減少因行駛方向改變或因發動機處于高轉速時換擋所造成的換擋沖擊,減輕司機的工作疲勞。
    In addition, the load sensing speed change control system of the automatic feeding mixer can shorten the operation cycle, reduce the fuel consumption by 15%, improve the operation efficiency and operation economy, reduce the shift impact caused by the change of driving direction or the shift when the engine is at high speed, and reduce the driver's fatigue.
    連桿機構可承受大的扭矩載荷,具有可靠性、耐用性和平行舉升機構相類似的作業性能工作裝置能以水平位置提升或降下放在托板上的物料,可配用多種作業裝置,大限度地減少司機由地面到大高度對鏟斗傾斜角的調整。
    The linkage mechanism can bear large torque load, and has reliability, durability and similar operating performance to the parallel lifting mechanism. The working device can lift or lower materials on the pallet in a horizontal position, and can be equipped with a variety of operating devices to greatly reduce the driver's adjustment of the bucket tilt angle from the ground to a large height.
    以上就是關于“自動上料攪拌車異常抖動怎么回事?”問題的講解內容了,您可以作為參考信息使用,當然您平常中也要多注意維護檢查工作的進行。關注我們http://www.djkenshu.com,了解更多信息!
    The above is the explanation of the problem "What is the abnormal shaking of the automatic feeding mixer?" You can use it as reference information. Of course, you should pay more attention to the maintenance and inspection work. Follow us http://www.djkenshu.com , learn more!

    截屏,微信識別二維碼

    国产精品成熟老妇女|KAGNEY与黑人激烈|强迫屈辱玩弄粗暴H|春药高潮抽搐流白浆在线观看|我怕来不及电视剧|国产成人精品午夜福利|染头发|赵丽蓉小品全集|女人张腿让男桶免费视频|国产亚洲精品久久久久9999