<label id="hi3ik"><kbd id="hi3ik"></kbd></label>
    <center id="hi3ik"></center>
    <span id="hi3ik"><noframes id="hi3ik">
    歡迎來到中科聚峰機械有限公司!

    24小時服務熱線:

    400-879-1999

    點擊撥打服務熱線:400-879-1999
    當前位置:首頁>新聞中心>常見問題>自動攪拌車防抱死系統出現故障時的檢查

    自動攪拌車防抱死系統出現故障時的檢查

    來源:http://www.djkenshu.com/ 日期:2022-11-14 發布人:guanli
    概述:自動攪拌車在使用過程中防抱死系統出現故障,從而影響攪拌車的正常工作。為了能夠盡快解決故障,我們須要先找出故障的原因,下面根據我公司
    自動攪拌車在使用過程中防抱死系統出現故障,從而影響攪拌車的正常工作。為了能夠盡快解決故障,我們須要先找出故障的原因,下面根據我公司從事攪拌車維修的經驗來,來為大家介紹一下自動攪拌車防抱死系統出現故障時的檢查方法。
    The anti lock system of the automatic mixer fails during use, which affects the normal operation of the mixer. In order to solve the problem as soon as possible, we need to find out the cause of the problem first. Now, according to our company's experience in mixing truck maintenance, we will introduce the inspection method when the anti lock system of automatic mixing truck fails.
    一、檢查混凝土攪拌車的駐車制動是否完全釋放。
    1、 Check whether the parking brake of the concrete mixer is completely released.
    二、檢查制動儲液罐液面是否符合說明書的規定。
    2、 Check whether the liquid level of the brake fluid reservoir meets the requirements of the manual.
    三、檢查所有的制動管路有無損壞變形和泄漏跡象。
    3、 Check all brake pipelines for damage, deformation and leakage.
    自動攪拌車
    四、檢查防抱死系統的所有熔斷絲是否完好,導線是否破損,插座是否牢固。
    4、 Check whether all fuses of the anti lock system are in good condition, whether the wires are damaged and whether the sockets are secure.
    五、檢查蓄電池容量和電壓是否符合規定,正負極導線的連接是否可靠。
    5、 Check whether the capacity and voltage of the battery meet the requirements and whether the positive and negative electrodes are reliably connected.
    六、檢查防抱死系統、ECI_I插接器連接是否牢靠。
    6、 Check the anti lock system and ECI_ I Check whether the connector is firmly connected.
    七、檢查電路連接處是否腐蝕、損壞、松脫或接觸不良,ABS的各搭鐵線搭鐵是否可靠。
    7、 Check the circuit connections for corrosion, damage, looseness or poor contact, and check whether the ABS grounding wires are grounded reliably.
    八、檢查輪胎是否符合要求。
    8、 Check whether the tires meet the requirements.
    九、檢查混凝土攪拌車的車輪轉動有無阻滯,輪轂軸承間隙是否正常。
    9、 Check whether the wheels of the concrete mixer truck are blocked and whether the wheel hub bearing clearance is normal.
    以上就是為大家介紹的有關自動攪拌車防抱死系統出現故障時的檢查的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們http://www.djkenshu.com!
    The above is a detailed introduction to the inspection of the anti lock system of the automatic mixer when it fails. I hope it will be helpful to you. If you have any questions, please contact us http://www.djkenshu.com !

    截屏,微信識別二維碼

    国产精品成熟老妇女|KAGNEY与黑人激烈|强迫屈辱玩弄粗暴H|春药高潮抽搐流白浆在线观看|我怕来不及电视剧|国产成人精品午夜福利|染头发|赵丽蓉小品全集|女人张腿让男桶免费视频|国产亚洲精品久久久久9999